Once again I learn you are never too old to learn something new.
Our new home has a #WalkInTub with water jets. We didnt get much documentation with it and Tracey has tried several times to get the jets working but couldnt.
Tracey took the access panels off the walls in the adjacent rooms to look at the workings of the thing while I searched with Google and Youtube to see what might be the problem.
The button that controls the jet function are air switches rather than wired switches. I had never seen these before. It makes sense you wouldnt want wired switches that close to the water.
The jet pump is plugged into an air switch which is plugged into a power outlet. So Tracey unplugged the pump from the switch and plugged it straight into the outlet. The pump runs so we know that is not the problem.
She had filled the tub with cold water for this test and a lot of moldy looking crap was cleaned out of the jet system. That will need to be cleaned with soap before she can start using it!
So we know it is one of three possible things that arent working. The air button that you depress which presses air down tubing to the air switch. The tubing itself. Or the air switch. So now we experiment some more.
Tracey plans to bring home a large syringe from work so she can force air down the tubing and into the electrical switch and see if she can it working.
Otherwise we will probably buy some new tubing. The tubing does seem old and stiff so maybe is not sealing well at one end or the other.