Keeping the bike road worthy required maintenance. Oil and grease kept things operating smoothly. Replacing broken parts and repairing innertubes were more time consuming and expensive.
By far the most frequent repair for me was patching or replacing the innertubes. I learned to do it without removing the wheel from the frame.
Less often I had to replace a broken pedal, but it was rather difficult if it broke off even with the crank.
I learned of the existence of left-hand threads the first time I went to buy a new pedal and was asked which pedal broke.
I didnt realize it made a difference.
I also learned it was wise to get a replacement that had a large slot in the end or, even better, an Allen head socket in the end. That way if the pedal broke off flush and there were no flats left on the stem to remove the broken piece inside the crank you could remove it from the other side by using a screwdriver or Allen wrench.
(As long as you remember a left side pedal has a left-hand thread.)
The worst and most expensive repair was instead of breaking the pedal at the stem, the threaded end of the crank broke off and I had to replace the entire crank.