November 9th, 2020 - Peoria, Illinois

2020 Truck Report (1990 F150)

Odometer on December 18th, 2020: 192,967 miles.
This is 2761 miles since this time last year, and 80,218 miles since July 24th, 2010, when purchased. Teleworking saved me about 3175 miles this year.
Gas mileage was 15.4mpg - down 9/10 mpg from last year. I'm thinking that's because most of this year's miles were during winter months.

Service this year:
October 28th: Changed oil and oil filter ($43.10). Greased ball joints and U-joints. Replaced license plate lamps ($6.94).
November 22nd: Took truck to Sancken Automotive due to leak at differential pinion seal. Diagnosis: loose pinion bearings; water in oil; all parts worn and rusted; both axle shafts worn.
December 18th: Picked up repaired truck. Repairs: replace complete rear axle with used unit; replace pinion seal and flange; replace both axle seals; replace rear brakes and wheel cylinders; replace one brake drum; replace parking brake cables (Shop Fee $28.50 + Services $570.00 + Parts $807.92 + Tax $66.65 = $1473.07).

I thought this would be my cheapest year yet, until I noticed in November some drips coming from the differential pinion seal. Figuring I'd have this repair done, I called Sancken Automotive. Kenny was the mechanic. I hadn't expected the truck to be in the shop for so long, but I'm happy with the job. Early on (after talking to me) Kenny ordered a listed for sale used differential, with the thought of using it for parts. He reported back later that the place he'd ordered from wasn't able to find it! That worked out, since the replacement he was able to get later was in excellent condition. With such a great used part the plan shifted from repair to just swapping the whole rear end. New brakes were needed, so I asked that the parking brake cables be replaced also while the brakes were installed. I'd never had a working parking brake on this truck. I'm better off now than I've ever been.

Looking ahead, there's the sweet smell of antifreeze when I turn on the defroster, indicating the need for a replacement heater core. No drips on the floor yet. I'm hoping this project can wait until spring.

Here's the front end of the differential, old and new:


And here are pictures of this year's truck adventures:

July 10th - hauling oven:


August 12th - hauling firewood:


October 10th - hauling bike:


November 11th - hauling leaves:


December 18th - ready for more adventures: